; $Id: local.opt 1.7 1997/09/29 23:50:27 kovner Exp $ ;--------------------------------------------------------------------------- [Information] Version = 0x100 [Device Type] Keys = DeviceType ValidValuesType = List default = (1,2,3) [Address Space] Keys = AddressSpace ValidValuesType = List default = (0,1,3) [Shared RAM Size] Keys = SharedRAMSize, InwardWindowAtBaseOfRam( : -1) GetMethod = InwardWindowAtBaseOfRam!0 ? -1 ValidValuesType = List Address Space:3 = (0) Address Space:0,Total Memory<0x800000 = ( ^0x100:0x800000, -1 ) Address Space:0 = ( ^0x100:0x800000 ) ; For AT-MXI-2 only allow share all system RAM in A32 only if less than 16MB installed Hardware Id:0xEB,Address Space:1,Total Memory>0x1000000 = ( ^0x10000:0x80000000 ) ; Otherwise always allow share all system RAM Address Space:1 = ( ^0x10000:0x80000000, -1 ) [Shared RAM Pool] Keys = SharedRAMPool ValidValuesType = Range ; in A16 only, the range has one value - 0 ; remove the dependency if Shared RAM Pool works without sharing memory Address Space:3 = 0:1:0 default = 0:1:0xFFFF [Lower Half Byte Order] Keys = LowerHalfByteOrder ValidValuesType = List Address Space:3 = () default = (0,1) [Upper Half Byte Order] Keys = UpperHalfByteOrder ValidValuesType = List Address Space:3 = () default = (0,1) [CPU MXI Deadlock Backoff MXI] Keys = CpuMxiDLBackoffMxi ValidValuesType = List default = (0,1) [CPU VXI Deadlock Backoff VXI] Keys = CpuVxiDLBackoffVxi ValidValuesType = List default = (0,1) [Map Halves At Same Address] Keys = MapHalvesAtSameAddress ValidValuesType = List Address Space:3 = () default = (0,1) [Resource Manager Delay] Keys = ResourceManagerDelay ValidValuesType = Range Logical Address!0 = :: default = 0:1:3600 ;---------------------------------------------------------------------- [Servant Area Size] Keys = ServantAreaSize ValidValuesType = Range default = 0:1:255 [Protocol Register] Keys = ProtocolRegister ValidValuesType = Range default = 0:1:0xFFFF [Read Protocol Response] Keys = ReadProtocolResponse ValidValuesType = Range default = 0:1:0xFFFF [Number of Handlers] Keys = NumberOfHandlers, DisableProgrammableHandlers(:0) ValidValuesType = Range default = 0:1:7 [Number of Interrupters] Keys = NumberOfInterrupters, DisableProgrammableInterrupters(:0) ValidValuesType = Range Logical Address:0 = 0:1:0 default = 0:1:7 [System IRQ Level] Keys = SystemIRQLevel ValidValuesType = Range default = 0:1:7 [Disable Mite DMA] Keys = DisableMiteDMA ValidValuesType = List default = (0,1) [DMA CPU Request Delay] Keys = DmaCpuRequestDelay ValidValuesType = List default = (0,1,2,3)