Offline Operations group meets every Wednesday at 9:00-10:00am in the B0 Theater. Teleconferencing: 82OFFLINE (@ 384K)
OFFLINE News
2005-01-21
10K test with pre2 ran successfully. Initial checks look good. Validation in progress.
no beamlines since Jan 17 - under investigation.
2005-01-19
6.1.0pre2 is ready for testing on the central platforms. Details - see Releases/6.1.0pre2
2005-01-18
dimension of one of the GEANT common blocks has changed in 3.21/14. 6.1.0pre2 will be built tomorrow morning.
10K test of 6.1.0pre1 passed. There are issues with the validation. Details: see
Releases/6.1.0pre1
2005-01-14
6.1.0pre1 is ready for testing on the central platforms. Details - see Releases/6.1.0pre1
FCDFSGI2 to be decommissioned on Jan 21 !
CDFSGA support reduced to 8x5, will be decommissioned this summer
2005-01-10
CDF Enstore downtime Wednesday, January 12, 9:00 - 12:00 (fwd)
2005-01-09
added monitoring of Express Production
2005-01-05
build of the CDF offline code under GCC 3.4.3 is close to success. failing packages: BottomAlgs,BottomMods,CalibDB,JPsiModules,JpsiXMods,Sin2BetaMods, SvxDaqMods, SvxDaqObjects, SvxDaqUtils, TrackingBenchmarks, TrackingUserMods
instructions on how to setup GCC 3.4.3 -based environment
2005-01-03
DH operations weekly report
2005-01-01
New Year discovery:
Wrong alignments at L3 (runs 190804 to 191669)
2004-12-23
Partial success with handling new TDC readout format (run 186318)
fileset CB4712.0 - stream A files , assigned to stream H ???
2004-12-22
testing 6.0.0int4:
problems with empty run sections in the output of production
see
related discussion
, answer by Fedor: use "rawRS set true" in DHMods when processing raw files.
What did change in the middle of 5.3.1 processing ?
2004-12-21
bookkeeping lessons from stream A
2004-12-20
disk cleanup in fcdflnx3:/cdf/scratch/cdfopr/testRel
10A calibrations are available for all the runs up to 191307
2004-12-19
fixes to express stntupling in place to allow the output to go into dsid=SOPR00 book=cdfopr, all the runs taken so far stntupled. -Pasha
automated monitoring of the calibration passes 10A,11A,17A put in place: check go to "Calibrations/Availability". -Pasha
From Ben: 10A calibrations available for runs up to 191307 except 191208,191289,191290
11A calibrations available for runs up to 190990
2004-12-18
10K test of 6.0.0int4a ran w/o crashes
2004-12-15
fcdfdata034 failed, using fcdfdata053 as a replacement (thanks Glenn and Rick)